5 Common Problems with INAX Toilets and How to Fix Them at Home

Among the sanitary equipment in the house, the toilet is the one that is least concerned about maintenance until it has a problem. A small problem can also affect daily life and cause a lot of discomfort. Understanding common errors and knowing how to handle them will not only help save costs but also limit the spread of damage. Below are 5 common problems that you can easily recognize and handle yourself at home.

1. Leaking toilet

Leaks are one of the most common problems. You may notice wet floors, water constantly dripping from the tank, or a toilet that won’t flush. This could be due to a worn rubber seal, a misaligned flush valve, or even an initial installation error.

If you know how to check and tighten loose parts, you can completely handle it yourself. In case of severe damage, replacement is necessary.

2. The toilet lid is broken or loose

After a period of use, the toilet lid often shows signs of loosening, cracking or making noise when sitting. This directly affects the experience and safety.

Replacing the Inax toilet lid does not require too much technique, just a few basic tools such as screwdrivers, pliers and a little care. Most of the lids today have a quick-release design, making it easy for users to do it themselves at home.

After a period of use, the toilet lid often shows signs of looseness and cracking.

3. Weak water supply or no water into the tank

If after flushing, the water tank does not refill itself or flows very slowly, the cause usually comes from the water float. The float may be stuck due to dirt, or has deteriorated after a long time of use.

In these cases, users can refer to how to remove the Inax toilet float to check, clean or replace this part. Periodic cleaning will help the water supply system operate more stably.

4. Clogged toilet

No one wants to be stuck in a situation where their toilet won't drain. Clogs can come from flushing too much toilet paper, foreign objects in the toilet, or narrowed pipes.

Some simple tips can help you handle it quickly such as using a rubber plunger, biological drain cleaner, or metal hook. However, if after a few attempts it still does not work, you should call a professional unclogging service.

5. Strange noise when flushing

Unusual noises like buzzing or rattling when your toilet flushes can be alarming. This is usually a sign of a loose flapper, loose water pipes, or a malfunctioning float.

You can open the radiator to observe the movement of the internal components. A few minor adjustments will often resolve the problem without replacing the unit.

Unusual noises such as buzzing or rattling when the toilet is flushed are usually a sign of a loose flush valve.

6. When should I call a professional?

Not all faults can be fixed on your own. If you have tried everything and the problem persists, or if the problem involves the main water supply system, it is advisable to seek the help of an experienced technician. Timely intervention will prevent further damage and save costs in the long run.

Understanding and handling common toilet problems early helps save time, costs and ensures uninterrupted daily activities. With operations such as replacing the Inax toilet lid or removing the Inax toilet float, you can completely do it yourself at home if you know how to do it.

Increasingly strict regulations make the dissolution procedure complicated and time-consuming. With MK Accounting's full dissolution service , you will receive comprehensive support from A to Z, helping the process take place quickly and in accordance with the law. Connect with us now for detailed advice.